Storing Only The Desired Tv Channels; Storing The Tv Channel Names - Sony CDX-CA860X Primary User Manual (English, Español, Français) Operating Instructions Manual

Storing only the desired TV
channels
You can assign up to 12 channels (6 each for
TV1 and TV2) to the number buttons in the order
of your choice.
1
Select "TV" (see "Watching the TV" on
page 22).
2
Press either side of (SEEK) to tune in
the TV channel you want to assign to
each number button.
3
Press and hold the desired number
button ((1) to (6)) until you hear a
small beep.
The number button indication and "MEM"
appear in the display.
Note
If you try to assign another channel to the same
number button, the previously assigned channel will
be erased.
Storing the TV channel
names
Follow the steps in "Storing station
names" (page 15).
Displaying the TV or radio station
names
Press (LIST) during TV or radio
reception.
Example: When receiving the FM1 band
FM 1
1
W C B
2
W B L
3
W K T
4
WR K I S
5
1 0
1
6
1 0
1 Preset numbers
2 Stored station names
3 Frequencies*
* If the name of a station is not assigned to number
buttons, the frequency of that station will be
displayed instead.
To turn off the list display on the TV monitor,
press (LIST).
Notes
• It may take a few moments before all indications
appear in the display.
• The current TV channel does not appear during list
display.
• The contents of preset memory cannot be listed
when the unit is in Simultaneous Play mode (page
24).
S
S
2
U
S
1 . 9
3
2 . 7
23