Storing Station Names; Station Memo - Sony CDX-CA860X Primary User Manual (English, Español, Français) Operating Instructions Manual

Storing station names

— Station Memo

You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1
Tune in a station whose name you
want to store.
2
Press (MENU), then press either side
of (DISC) repeatedly until "Name Edit"
appears.
3
Press (ENTER).
4
Enter the characters.
1 Press the (+)* 1
(DISC) repeatedly to select the
desired character.
A B C
t t ... t
t – t ... t
*
*1 For reverse order, press the (–) side of
(DISC).
*2 (blank space)
2 Press the (+) side of (SEEK) after
locating the desired character.
If you press the (–) side of (SEEK), you can
move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
Press (ENTER).
side of
0 1 2
+
t t ... t
A
* 2 t
Tips
• Simply overwrite or enter "
name.
• There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing (LIST) for 2 seconds instead of step 5.
Erasing the station name
1
During radio reception, press (MENU),
then press either side of
(DISC) repeatedly until "Name Del"
appears.
2
Press (ENTER).
3
Press either side of (DISC) repeatedly
to select the station whose name you
want to erase.
4
Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other
names.
5
Press (MENU) twice.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
"NO Data" appears in step 4.
" to correct or erase a
15