Step 5. Configure Events (Motion Detection And Snapshots); Configure Motion Detection - TRENDnet TV-IP310PI Configuration Manual

You need to set the following parameters:
Enable snapshot to FTP:
Server address:
Port:
Username, password and confirm password:
Directory structure:
Directory:

Step 5. Configure Events (Motion Detection and Snapshots)

5.1 Configure Motion Detection

If you ordered a service plan with motion detection enabled, then you must configure motion detection
with your camera. Click the "Events" tab and select Motion Detection as shown below:
Enable
66.220.9.45
21
The same username and password used on
CameraFTP.com
Save in directory
With Camera Name