Introduction - TRENDnet TV-IP310PI Configuration Manual

TRENDnet TV-IP310PI is a low-cost yet powerful PoE outdoor network camera. It supports
3MP image resolution, which is 50% higher than Full HD 1080P; it supports up to 100-feet night
vision, which is significantly better than most other IP cameras. The only drawback is it does not
support video clip recording.
If you need to monitor a very large outdoor site (such as a construction site), but you only need
to record one image every few seconds or minutes, then this camera is an ideal choice.
Basic camera information
Video / image resolution
Audio recording
Image upload frequency
Video frame rate
Night-vision
Image snapshot recording
Video clip recording
Motion detection
Continuous recording
Supported video format
Connection type
PoE (Power on Ethernet)
Indoor / outdoor
Lowest pricing (as of
8/4/2015)
Note: This document is not designed to replace the product manual from the manufacturer. The
information provided is based on our knowledge of the model TRENDnet TV-IP310PI. It may
not be accurate or completely up-to-date. Users shall contact the manufacturer for all camera-
related issues and contact us only for CameraFTP-related (cloud service / FTP) issues.
The first two steps are camera related and are very trivial. If you have finished these basic steps,
you can skip Steps 1 and 2.

Introduction

2048x1536,1920x1080, 1280x800,1280x720
No
1 image per 1, 2, 3, 4, 5, 6 or more seconds.
Cannot upload video clips to the cloud
Up to 100 feet (30m)
Supported, supports 1-5 images/s and 1 image/N seconds
Not Supported
Supported
Supported
JPEG image only
Ethernet cable, (PoE)
Yes
Outdoor
$160