Asus ROG Maximus XI Gene Manual page 43

15. DIMM.2 slot (DIMM.2_SLOT)
This socket allows you to install the bundled DIMM.2 card to connect M.2 SSD
modules.
• Before you install or remove the DIMM.2 card, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard or DIMM.2 card.
• The DIMM.2 card is notched to fit in only one orientation. Ensure that the notch on
your card is aligned correctly with the DIMM.2 slot before inserting the card.
• DIMM.2 module supports PCIe 3.0 x4 M Key design and type 2242 / 2260 / 2280 /
22110 PCIe storage devices.
• These sockets support IRST (Intel
The M.2 SSD module is purchased separately.
ROG MAXIMUS XI GENE
Rapid Storage Technology).
®
1-27