Onboard Leds - Asus ROG Maximus XI Gene Manual

1.1.8

Onboard LEDs

1. Q LED (BOOT, VGA, DRAM, CPU)
Q LED check key components (CPU, DRAM, VGA card, and booting devices) in
sequence during motherboard booting process. If an error is found, the corresponding
LED remains lit until the problem is solved. This user-friendly design provides an
intuitive way to locate the root problem within seconds.
The Q LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
2. Condensation detection LEDs
These LEDs will light up when water condensation is detected on the corresponding
critical key components (CPU, DRAM, and PCIE). This user-friendly design helps you
quickly identify possible damages caused by condensation.
1-14
Chapter 1: Product Introduction