Install The Transmitter - JTS UT-16GT Manual

5-3 Install the transmitter

(1) Use the 6.3GT plug for guitar application
1. Insert the plug to the transmitter and turn it to the end.
2. Plug the transmitter into the instrument to be used.
3. Push down the transmitter towards the instrument. The step positioning
mechanism will hold the transmitter firmly on the instrument.
4. For traditional Gibson style end-mount input a sucker holder
provided to prevent swiveling of the transmitter.
(2) Use the 508GT microphone module for winds application
1. Insert the 508GT to the transmitter and turn it to the end.
2. Slide the clip into the transmitter and push it to the end.
3. Fix the clip to the instrument by turning the screw clockwise.
4. Adjust the 508GT to a position for desired sound performance.
14
is
14
29
8