Configuration; Programme Management; Configure System; Advanced Configuration - Primer LS-11 Instruction Manual

4 CONFIGURATION

4.1 Programme management

If the washing machine is configured in self-service mode, only the first 6 programmes will be
available, the remaining programmes become available on entering Credit Mode.

4.2 Configure System

4.2.1

Advanced configuration


Credit Mode: If the washing machine is in self-service mode, the password for Credit Mode
(1234 by default) can be configured. Make a note of the password in a safe place. If you lose it,
please contact the technical support service.

HUD: In self-service mode it is also possible to configure the Standby Screen, the Main Screen
and the Run Screen. (See section 2).

Beep: Option permitting the buzzer to be disabled. By default it is enabled.

RABC/Traceability: See advanced OPL configuration. In self-service mode, this should function
in the same way.

Currency: Select currency with which you wish to operate (see section 4.2.3.). If the currency is
changed, all the prices will be reset, by default to token.

Payment Method: There are 3 different modes for operating in self-service mode.

COIN: The currency and price of each programme must be configured, using the
coin slot pulses to enable a set programme to be run.

Central Payment: The washing machine receives a pulse from a payment centre to
release the washing machine and permit a programme to be run. Default setting.

The currency, price and price programming options are disabled.

Card reader: Same compartment as the "Central Payment" option. The currency,
price and price programming options are disabled.

Prices: The prices of all the selected programmes can be configured in "My Programmes". The
minimum value of the programme will be the multiple defined in the currency, and the maximum will
be 100 times the value of the multiple. The default setting is the minimum configurable value.
EN
Página 37 de 43