Self Service; Introduction; Interface; Standby Screen - Primer LS-11 Instruction Manual

1

INTRODUCTION

This section lists the characteristics which are exclusive to self-service washing machines. The
safety warnings must be read and it is advisable to read the rest of the manual in order to fully
understand how the machine operates.

2 INTERFACE

2.1 Standby Screen

While the washing machine is waiting for the money to be inserted, the Standby Screen is
displayed. When the money has been inserted or if the touch screen is touched this changes to the
self-service Main Screen.
3
2
1. Laundrette message: The message configured by the user (if enabled) is displayed.
2. Logo: Depending on the make selected, the corresponding logo will be displayed (if
enabled).
3. Machine identifier: The label identifying the appliance based on the existing
configuration is displayed (if enabled).
4. Date: The current date is displayed in the format selected by the user (provided this is
enabled in HUD).
5. Time: The current time is displayed in the format selected by the user.
6. Model, Heating and SW version: This indicates the model configured and the SW
version. Behind the model identifier a letter is displayed indicating the type of heating
configured (No letter – Hot water, E – Electric, S – Steam).
On completion of a programme, the machine goes directly to this screen.
In addition, even if the screen has been touched, or the money has been inserted, if there is no
activity within 30 minutes, the machine returns directly to this screen, resetting the amount which
might have been inserted.
2.2

Direct selection Screen

Click in the self-service Standby Screen to go to the Direct selection Screen for this programme.
The characteristics of the programmes are displayed in this screen: Name, Length, Temperature,
Price (only in COIN mode, in CP and CR no).
EN
4
5
1
Página 32 de 43