Run Screen - Primer LS-11 Instruction Manual

2.4 Run Screen

When START is pressed, the programme begins and the Run Screen is displayed.
While in run mode, it is also possible to enter "Credit mode" as described above. If this mode is
entered, it automatically exits self-service mode and behaves as if it were in OPL mode, displaying
the information defined on the OPL Run Screen and offering the option to perform all the actions
defined on this screen.
In self-service mode, the option to forward or pause the programme does not exist unless "Credit
mode" is entered.
Nor is the STOP button for aborting a programme there by default, although it can be activated
using the HUD.
If the STOP button is activated in self-service mode, it is necessary to hold the button down for 3
seconds until the machine off confirmation message is displayed.
1
5
8
1. Machine identifier: Label identifying the machine.
2. Time: Time and minutes in the selected format.
3. Programme name: Name configured for the selected programme.
4. Programme number and length: Position of the programme in the list of programmes (My
Programmes), and the estimated length in minutes for the programme selected.
5. Programme progress indicator: Status of programme progress, relation between total time
and time remaining for programme.
6. Status (drawing): Animated drawing showing the current cycle of the washing machine
(filling, draining, washing, rinsing, spinning or untangling).
7. Currently running cycle: Identifier and name of currently running cycle.
8. Stop (default setting disabled): Button to stop and cancel the programme. A confirmation
message will be requested.
2 3
6
4
7
EN
Página 35 de 43