Remington HyperFlex Aqua XR1430 User Manual page 6

ENGLISH
, To Set the Travel Lock:
• Press and hold the on switch for 3 seconds. The shaver will turn on, then will
shut off after the 3 seconds. The LED display will flash five times to indicate
the lock is set.
• While the travel lock is set, if the on switch is pressed, the LED display will
flash three times to indicate the shaver is in travel lock mode.
, To Unlock the Travel Lock:
• Press and hold the on switch for 3 seconds. The LED display will flash three
times while the button is being held and then the shaver will turn on.
, Turbo feature (XR1470 only)
• The XR1470 comes with a Turbo feature to shave thick stubble. Press the
on/off switch once to operate the shaver at normal speed. Press the on/off
switch a second time to operate the shaver in Turbo mode. When the Turbo
feature is activated the LED display will cycle around.
• To deactivate press the on off switch once to turn the shaver off.
E TIPS FOR BEST RESULTS
• Use moderate to slow stroking movements. The use of short circular motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
• DO NOT press hard against the skin in order to avoid damage to the rotary
heads.
C CARE FOR YOUR SHAVER
• Care for your appliance to ensure a long lasting performance.
• We recommend you clean your product after each use.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
, CLEANING
6