Remington HyperFlex Aqua XR1430 User Manual page 5

ENGLISH
, XR1450: The fuel gauge will display the amount of charge left when the
shaver is on. When charging, the LEDs blink in a clockwise rotation. When
fully charged all LEDs will illuminate then turn off.
, XR1470: When charge is low 'Lo' will appear on the screen and will flash until
the shaver is plugged in to charge. When charging, the LEDs blink in a
clockwise rotation. When fully charged the indicator will flash 60 for 5
minutes and then the display will shut off.
• To preserve the life of your batteries, let them run out every 6 months then
recharge for 24 hours.
• The appliance adapts automatically to a mains voltage between 100V and
240V.
F INSTRUCTIONS FOR USE
, SHAVING
, Note: This shaver is for cordless use only.
• Make sure your shaver is properly charged.
• Switch the shaver on.
• Stretch the skin with your free hand so the hairs stand upright.
• Only apply light pressure on the shaving head while shaving (pressing too
hard can damage the heads and make them vulnerable to breakage).
• Use short, circular strokes.
, SHAVING WITH SHAVING GEL
• Follow the same instructions as dry shaving if using shaving gel.
, CAUTION
• After use with shaving gel, please rinse the head and cutters under warm
water to clean away any excess gel and debris.
, TRIMMING
• Push the trimmer button to release the detail trimmer.
• Hold the trimmer at a right angle to your skin.
• Place the trimmer at desired trim line for a quick, easy, professional trim.
• To retract the trimmer, push down until it locks into position.
, TRAVEL LOCK FEATURE
• Model XR1470 is equipped with a Travel Lock feature, intended to prevent
the shaver from turning on and discharging accidentally while packed in
luggage.
5