C Getting Started; Charging Stand - Remington HyperFlex Aqua XR1430 User Manual

ENGLISH

C GETTING STARTED

It is recommended that you use your new shaver daily for up to four weeks to
allow time for your beard and skin to become accustomed to the new shaving
system.

, CHARGING STAND

• Rotate open the charge stand fully to stand firmly on a flat surface while
charging. For travel you can fold the stand around the shaver (see below).
, CHARGING YOUR SHAVER
• Ensure the appliance is turned off.
• Connect the charging stand to the adaptor and then to the mains.
• Place the shaver in the charging stand.
• Charge for at least 24 hours when using for the first time.
• Allow 90 minutes for a full charge (XR1450 and XR1470) and 4 hours for
XR1430.
• The charging indicator light (XR1430), fuel gauge (XR1450) or LCD display
(XR1470) will indicate when the shaver is fully charged.
, XR1430: When charge is low, the top LED will illuminate a solid red light.
When charging the bottom LED will illuminate a solid green light. When fully
charged both LEDs will be off.
4