Omega VSHP SERIES Installation And Operation Manual page 16

OMEGA | WATER SOURCE HEAT PUMPS
alarm.
7. Open up your internet browser (i.e. Explorer, Google
Chrome) and type in the following address 192.168.0.99.
8. The following home page will load for the controller software.
Below is a screen shot of the interface (version 5.4 software is
shown).
9. An event log feature called Log Dump allows for recording
unit operation information during faults or at start-up as a trou-
bleshooting aid. For example in the figure below the first line
item indicates "Y" terminal was energized (Y=1) when the Cool-
ing (CLG=1) and tripped on Low Pressure fault (LP=0).
Captured unit controller details include: 'Y' ,'O/B', 'CPR'
=compressor, 'RV'= reversing valve, 'HTG' = heating, 'CLG' =
cooling, LP = low pressure, 'HP' = high pressure, Fan, Conden-
sate, LPALM = low-pressure alarm, HPALM = high-pressure
13 www.omega-heatpump.com