Mooer Micro Series Owner's Manual

Octave Pedal
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center
minus. The maximum working voltage shall not exceed 12V, otherwise may be
dangerous equipment damage, fire or other problems.
Unplug the AC power adapter when not using or during electrical storms.
Connections
Always turn off the power of this and all other equipment before connecting or
disconnecting, this will help prevent malfunction and / or damage to other devices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,
cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
Direct sunlight
Magnetic fields
Excessive dusty or dirty location
Strong vibrations or shocks
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
Main Features
 Precise polyphonic octave effects with no distorted sound
 11 different octave modes
 Full metal shell
 Very small and compact design
 True bypass switch
 DC 9V adapter power supply
Heat sources
Extreme temperature or humidity
High humidity or moisture
3
6
7 8
9
4
5
8. UPPER Knob: Adjusts the level of UPPER part signal.
9. MODE Knob: Switch between 11 octave modes.
Octave Mode List
No. SUB
1 OCT
1
2 1 OCT
3 2 OCT
4 2 OCT
5 2 OCT
+1 OCT
6
1 OCT & 2 OCT
7
1 OCT & 2 OCT
8
1 OCT
9
2 OCT
10
11 1 OCT &
Input: 1/4" monaural jack (impedance: 470k Ohms)
Output: 1/4" monaural jack (impedance: 100 Ohms)
Power Requirements: AC adapter 9V DC (center minus plug),
recommended to use Mooer Micro Power
Current Draw: 128 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS Footswitch:
Push down the footswitch to toggle
between on and bypass status.
2. ON/OFF LED:
Shows the on/off status of PURE
OCTAVE , when the LED is lit
the effect is engaged.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter (plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
6. DRY Knob:
Adjusts the level of original signal.
7. SUB Knob:
Adjusts the level of SUB part signal.
UPPER
+1 OCT
+2 OCT
1 OCT
+1 OCT
+2 OCT
+2 OCT
+1 OCT
+2 OCT
+1 OCT & +2 OCT
+1 OCT & +2 OCT
+1 OCT & +2 OCT
2 OCT