Advertisement
Saver Safe Evacuation Chair
3a. Preparing the Chair for use.
1. Remove the Chair from the wall
bracket and unbuckle the strap
whilst holding the chair in a folded
position.
2. Place the Chair on the floor and
adjust the handle to the required
height by holding the chair in place
with your foot and pulling upwards
on the handle. The Handle can be
lowered using the release button
located on the inside of handle tube.
3. Pull rear wheels up and away from
the frame until they lock in to place.
4. Tilt chair back so it is sitting on all
four wheels and pull the seat
forward into a sitting position.
5.
The Chair is now ready for use
FERNO/MAN/10/09/190UK
.
Page 6 of 13
Advertisement
