Setup; Safety Information; Assembling The Shower And Toilet Commode - Invacare Aquatec Ocean VIP User Manual

Aquatec ® Ocean VIP / VIP XL / Dual VIP

4 Setup

4.1 Safety information

WARNING!
– Check the parts for transport damage before
commissioning and contact your dealer if required.
– Ensure during assembly that the parts are positioned
correctly with respect to one another.
This section explains how to assemble the product.
The product is dismantled in the reverse order.

4.2 Assembling the shower and toilet commode

Fitting the seat frame tube for height adjustment
1. Pull the two clips E for height adjustment from the inside D of
the seat frame A and insert into the side section C from the
outside until both lugs F enclose the seat frame tube B.
10
Adjusting the seat height
WARNING!
– The seat height must be adjusted to suit the user. As
a rule, the seat height is correctly adjusted when the
user is sitting on the commode and both feet touch
the ground.
– The seat height must be adjusted on both sides
simultaneously. To make adjustments, a second
person is required to help.
– Do not adjust the seat height of the commode when
someone is sitting on it.
1. Slightly raise the commode at the seat frame.
2. Take out both clips E.
3. Pull the seat frame out of the side section A or push it in.
4. Align the clip recesses C at the side section with a hole on the
seat frame D.
5. Push both clips from the outside into the side section until the
two lugs F enclose the seat frame tube B.
Fitting the backrest
1563142-A