Operation; Remote Control - I-care IC222 Operating Manual & Warranty

OPERATION:

IC222 ELECTRIC BED OPERATION
NEVER operate if the unit has a damaged cord or plug. If it is not working properly, call a
qualified technician for examination and repair.
Keep all electrical cords away from heated or hot surfaces.
Ensure all cables and cords are routed such that they will not become entangled or
pinched. Otherwise damage or injury may result.
Allow a slight pause between adjustments and avoid pressing multiple buttons at the
same time. If pendant buttons are depressed too rapidly or multiple buttons are pressed
at the same time, the desired feature may not activate. Simply release the pendant but-
ton, permit a slight pause and then activate the next operation.
1. Before placing the bed into use, test it by operating it through all phases of its oper-
ation.
2. If any problems arise during the test, recheck all electrical and mechanical connec-
tions.
3. IC222 electrical beds use a six function hand piece for all bed operations

REMOTE CONTROL

Head Raise
Knee Raise
Height Raise
WARNING!
CAUTION!
Head lower
Knee Lower
Height Lower