Subscribe to Our Youtube Channel
Related Manuals for I-care IC333
Summary of Contents for I-care IC333
- Page 1 IC333 BED SYSTEM OPERATING MANUAL & WARRANTY NEED HELP? CALL OUR TEAM AU: 1800 105 853 | NZ: 0800 143 922...
- Page 2 1. SPECIAL NOTES 2. GENERAL GUIDELINES 3. UNPACKING 4. ASSEMBLY 5. OPERATION 6. HEADBOARD INSTALLATION 7. WARRANTY TERMS...
-
Page 3: Special Notes
SPECIAL NOTES: Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. Refer to the table below for defini- tions of the signal words. This model meets Australian and New Zealand Standards and is registered by the Thera- peutic Goods Administration. -
Page 4: General Guidelines
GENERAL GUIDELINES: OPERATING INFORMATION DO NOT use near explosive gases Keep the product a minimum of 30cm away from any direct heat source Close supervision is necessary when this product is used by or near children Check all parts for shipping damage and test before using. In case of damage, DO ... - Page 5 UNPACKING: RECEIVING Count cartons before signing shipping papers Designate someone at the facility to receive and inspect all merchandise. Use the master order acknowledgement to check off items as they are received. Compare the number of cartons shipped with the number of cartons actually re- ceived and note such on the consignee copy of the freight bill.
- Page 6 ASSEMBLY: 1: Remove power cord, hand piece and retainer bar from underneath the bed 2: Insert retainer bar into the holes at the end of bed 3: Move bed into desired position, plug into power. Then raise the bed and lock all the castors...
-
Page 7: Operation
Before placing the bed into use, test it by operating it through all phases of its oper- ation. If any problems arise during the test, recheck all electrical and mechanical connec- tions. IC333 electrical beds use a ten function hand piece for all bed operations REMOTE CONTROL Head Raise Head lower... - Page 8 HEABOARD INSTALLATION: STEP ONE: Unpack headboard STEP 2: Place headboard in position (this may require two people) STEP 3: Screw headboard bolts into the holes provided. Tip: screw in the top ones for a start.
-
Page 9: Limited Warranty Terms & Conditions
LIMITED WARRANTY TERMS & CONDITIONS: Sleep Systems warrants the IC333 Height Adjustable Bed and parts to the Customer against defective materials and defective workmanship, from date of invoice. Steel Frame of Bed - 10 Year Limited Warranty Actuators - 5 Year Limited Warranty... - Page 10 CONDITIONS This warranty covers products where Sleep Systems has established there has been a manufactur- ing or material defect within the warranty period. Sleep Systems will at its discretion either repair or replace the faulty products. The original warranty expiry date will still apply to the repaired or re- placed products.
Need help?
Do you have a question about the IC333 and is the answer not in the manual?
Questions and answers
The head up and down buttons on control not working on IC333 hospital bed
If the head up and down buttons on the I-care IC333 hospital bed are not working, possible issues include:
1. Pendant Button Misuse: Pressing buttons too quickly or multiple buttons at once can prevent the desired feature from activating. Release the button, pause briefly, then try again.
2. Electrical Problems: Check for damaged cords or plugs. Ensure cables are not entangled, pinched, or near hot surfaces.
3. Connection Issues: Recheck all electrical and mechanical connections.
4. Component Failure: If problems continue, contact a qualified technician for examination and repair.
This answer is automatically generated
ICCC bed, the orange button keeps flashing. Why would this be? I have checked it the bed is plugged in correctly and there doesn't; seem to be any loose cables.