Table of Contents
Advertisement
FrONT MANUAL CLIMATE CONTrOL
(if equipped)
B
WARM
A
I
A/C
H
FRONT
G
FrONT FAN SPEED CONTrOL –
Use to select
A
the blower fan speed. Turn to the right for
higher speed or left for lower speed.
B
DrIvEr'S TEMPErATUrE CONTrOL –
Use to
select the degree of heating / cooling. Turn the
knob to the WARM position for warmer air or
COOL position for cooler air.
C
PASSENGEr'S TEMPErATUrE CONTrOL –
to select the degree of heating / cooling. Turn
the knob to the WARM position for warmer air
or COOL position for cooler air.
rEAr FAN SPEED CONTrOL
D
(front control only)
–
Use to select the blower fan speed. Turn
to the right for higher speed or left for lower
speed.
rEAr TEMPErATUrE CONTrOL –
Use to
E
select the rear air temperature. Push the
upper part p for warmer air or push the lower
part q for cooler air.
TO rEMOvE FrOST Or FOG ON THE WINDSHIELD:
1.
Set the temperature control
to the desired setting.
B
C
2.
Set the fan speed
A
to the highest setting.
3.
Set the mode selection control
to the defrost position.
F
NOTE:
• If the air conditioner filter for the evaporator blower is not replaced per the scheduled
maintenance section, excessive window fogging may result. The filter is located in the
evaporator housing behind the glove box. Your authorized Hyundai dealer can replace this
filter for you.
• To speed up defogging and dehumidifying, the fresh air mode should be selected.
12
C
WARM
OFF
0
F
E
REAR TEMP
R
REAR
MODE SELECTION CONTrOL –
Use to select
F
the direction of the air flow.
G
rEAr WINDOW DEFrOST CONTrOL –
remove moisture from the rear window.
AIr INTAKE CONTrOL:
H
• Recirculated Air Position – When the
indicator light on the control is illuminated
Use
air from within the passenger compartment
is drawn through the heating system and
is heated or cooled according to the other
functions selected.
• Fresh Air Position – When the indicator
light on the control is not illuminated air
enters the vehicle from outside and is heated
or cooled according to the other functions
selected.
AIr CONDITIONING CONTrOL –
Press to turn
I
A/C ON or OFF.
FrONT AUTOMATIC CLIMATE CONTrOL
(if equipped)
B
AUTO
D
A
PUSH
OFF
FRONT
L
FrONT FAN SPEED CONTrOL –
A
the blower fan speed. Turn to the right for
higher speed or left for lower speed.
Press to
AUTO TEMPErATUrE CONTrOL –
B
allow the system to automatically control the
heating and cooling.
DrIvEr'S TEMPErATUrE CONTrOL –
C
select the degree of heating. Press the p for
warmer temperatures or press the q for cooler
temperatures.
D
DISPLAY WINDOW –
temperature control setting, the fan speed
setting and the selected air flow setting.
PASSENGEr'S TEMPErATUrE CONTrOL –
E
to select the degree of heating. Press the p
for warmer temperatures or press the q for
cooler temperatures.
F
DUAL TEMPErATUrE CONTrOL SWITCH –
Press to operate the driver and passenger side
temperature individually.
G
rEAr FAN SPEED CONTrOL
–
Use to select the blower fan speed. Turn to
the right for higher speed or left for low speed.
TO rEMOvE FrOST Or FOG ON THE WINDSHIELD:
1.
Set the temperature control
2.
Set the fan speed
3.
Press the front windshield defrost control
NOTE:
• If the air conditioner filter for the evaporator blower is not replaced per the scheduled
maintenance section, excessive window fogging may result. The filter is located in the
evaporator housing behind the glove box. Your authorized Hyundai dealer can replace this
filter for you.
• To speed up defogging and dehumidifying, the fresh air mode should be selected.
D
C
A/C
DUAL
72
70
TEMP
F
LO
REAR TEMP
HI
M
N
O
MODE
A/C
K
I
j
Use to select
rEAr TEMPErATUrE CONTrOL –
H
select the rear air temperature. Push the
upper p for warmer air or push the lower q
for cooler air.
Press to
I
FrESH AIr SYSTEM CONTrOL –
activate / deactivate. In this mode air
enters the vehicle from outside and is
Use to
heated or cooled according to the other
functions selected.
rEAr WINDOW DEFrOST CONTrOL –
j
remove moisture from the rear window.
Displays the
K
AIr CONDITIONING CONTrOL –
A/C ON or OFF.
Use
OFF –
Press to turn off the system.
L
MODE SELECTION CONTrOL –
M
the direction of the air flow.
FrONT WINDSHIELD DEFrOST CONTrOL –
N
Press to activate / deactivate to clear the
windshield of fog and / or thin ice.
O
AIr INTAKE CONTrOL –
(front control only)
deactivate. In this mode air from within the
passenger compartment is drawn through
the heating system and is heated or cooled
according to the other functions selected.
C
F
to the desired setting.
A
G
to the highest setting.
.
N
E
F
TEMP
DUAL
F
G
0
REAR
R
TEMP
REAR
H
Use to
Press to
Press to
Press to turn
Use to select
Press to activate /
13
Advertisement
Table of Contents
