Getting Started; Step 1: Charging The Battery Pack - Sony XR500VE Handbook

Getting started

Step 1: Charging the battery pack

Battery pack
AC Adaptor
You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your
camcorder.
You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder.

1
Turn off your camcorder by closing the LCD screen after replacing the
viewfinder.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the  mark on the DC plug with that on the DC IN jack.

The /CHG lamp lights up and charging starts. The /CHG lamp turns off when the
battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
See page 119 on recording and playing time.

DC IN jack
DC plug
Power cord (mains lead)
18
ACCESS lamp
(hard disk)
/CHG lamp
To the wall outlet
(wall socket)