Clock/ Lang (Items To Set Clock And Language) - Sony XR500VE Handbook

CLOCK/ LANG
The default settings are marked with .
CLOCK SET
See page 21.
AREA SET
You can adjust a time difference without stopping the clock. Set your local area when using
your camcorder in other time zones. Refer to the world time difference on page 123.
Steps
(HOME) (SETTINGS)

using /
 
AUTO CLOCK ADJ (HDR-XR500VE/XR520VE)
Your camcorder will maintain the correct clock time by acquiring the time from GPS.
Set the GPS switch to ON in advance.
Steps
(HOME) (SETTINGS)

setting
 
 ON
OFF

Notes
You must set the date and time on your camcorder before using your camcorder (p. 21).

There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated.

The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the

camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder
is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the
GPS switch is set to ON.
AUTO AREA ADJ (HDR-XR500VE/XR520VE)
Your camcorder will compensate for a time differences with the current area automatically
when it detects a time difference, by acquiring the current location information from GPS.
Set the GPS switch to ON in advance.
(Items to set clock and language)
[CLOCK/


[CLOCK/


Adjusts the clock automatically.
Does not adjust the clock automatically.
LANG] [AREA SET]

LANG] [AUTO CLOCK ADJ]


set your local area

a desired
