Sony XR500VE Handbook page 113

Sounds cannot be recorded while shooting

an about-3-second movie using [SMTH SLW
REC].
Left and right sound will be heard
unbalanced when playing back movies on
computers or other devices.
This happens when sound recorded in 5.1ch

surround is converted to 2ch (normal stereo
sound) by a computer or other device. This is
not a malfunction.
Change the sound conversion type (downmix

type) when playing back on 2ch stereo devices.
Refer to the instruction manual supplied with
your playback device for details.
Change the sound to 2ch when creating a disc

using the supplied software "PMB. "
Record sound with [AUDIO MODE] set to

[2ch STEREO] (p. 75).
The demonstration movies cannot be
played.
Select the internal hard disk for the recording

media, and the high definition image quality
(HD).
The demonstration movie is deleted.

Playing back images stored on
"Memory Stick PRO Duo" media on
other devices
Images cannot be played back or
"Memory Stick PRO Duo" media are not
recognized.
You cannot play back high definition image

quality (HD) movies on "Memory Stick PRO
Duo" media on a device that is not compatible
with AVCHD format.
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the

image.
Movies cannot be added in the Playlist.
There is no free space in the recording media.

You can add no more than 999 high definition

image quality (HD) movies, or 99 standard
definition image quality (SD) movies, to a
Playlist. Erase unnecessary movies from the
Playlist (p. 66).
You cannot add photos in the Playlist.

A movie cannot be divided.
A movie that is too short cannot be divided.

A protected movie cannot be divided.

A photo cannot be captured from a
movie.
The recording media where you want to save

photos is full.
Playback on the TV
Neither image nor sound is played on the
connected TV.
When you are using the component A/V

cable, set [COMPONENT] according to the
requirements of the connected device (p. 94).
When you are using the component video

plug, make sure the red and white plugs of the
A/V connecting cable are connected (p. 52,
53).
Images are not output from the HDMI OUT

jack, if copyright protection signals are
recorded in the images.
When you are using the S VIDEO plug,

make sure the red and white plugs of the A/V
connecting cable are connected (p. 53).
11