Siemens Simatic SM331 Getting Started page 9

You will be guided through these steps
• Mechanical setup of the sample station (see chapter 4)
• Electrical wiring of the sample station (see chapter 5)
• Configuration with SIMATIC Manager (see chapter 6)
• User program testing (see chapter 7)
• Utilizing the diagnostic capabilities of the SM331 module (see chapter 8)
• Application of hardware interrupts (see chapter 8)
! General mounting instructions for S7-300 modules
! Configuration of the SM331 for the two selected measure-
ment transducer types
! Wiring of the power supply and the CPU
! Wiring of the analog module
! Standard pin layout of two measurement transducer types
! Wiring of unused inputs
! Use of project wizard
! Completing the automatically generated hardware configura-
tion
Integration of the supplied user program source
!
! Interpreting the read values
! Converting the measured values into readable analog values
Triggering a diagnostic interrupts
!
! Analyzing the diagnostics
! Parameterization of hardware interrupts
! Configuration and analysis of hardware interrupts
7 Getting Started SM331 AI 8x12bit Part1: 4-20mA
A5E00253410