SIMATIC Manager has opened the source file. On the right pane you can
see the source file inserted.
Figure 6-16
Storing the source file
Compile source code
In order to create an executable STEP7 program, the STL source has to be
compiled.
Double click the source file GSSM331T1DE in the Sources folder. The
source code editor is called.
In the window of the source code editor you can view the source code
(code from Chapter 10).
Figure 6-17 Source code editor
37
Getting Started SM331 AI 8x12bit Part1: 4-20mA
A5E00253410