Quickly Locating A Scene Using The Zero Set Memory Function - Sony TRV315 Operating Instructions Manual

Quickly locating a scene using the zero
set memory function
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of "0:00:00". Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
(3) Press p when you want to stop playback.
(4) Press 0 to rewind the tape to the tape counter's zero point. The tape stops
(5) Press (. Playback starts from the tape counter's zero point.
Notes
•The zero set memory function works only for tapes recorded in the Digital8
•When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function will be canceled.
•There may be a discrepancy of several seconds from the time code.
•The zero set memory function may not work when there is a blank portion between
pictures on a tape.
44
counter shows "0:00:00" and the ZERO SET MEMORY indicator flashes.
automatically when the tape counter reaches approximately zero. The ZERO
SET MEMORY indicator disappears and the time code appears.
ZERO SET MEMORY
DISPLAY
system.