SC iStick QC 200W User Manual page 76

74
Note
1� Please use this function only at room temperature so that the correct base resistance can be
displayed in lock mode�
2� When you replace the coil, the battery "remembers" the set resistance� This can be increased by a
rise in temperature� If you change the coil in Unlock mode, the display will show "New coil up same
down" and the coil resistance can be reset� If you continue to use the same coil, press the "Down"
button� If it is a new coil, press the "Up" button� Please unlock the resistance if you want to use a
vaporizer head with a different resistance�
3� 3� If you inadvertently use conventional coils that are not suitable for temperature-controlled va-
ping or whose resistance is greater than 1�5 ohms in TC or TCR mode, the device will automatically
switch to VW mode�
IStick QC 200W - Selection & Operation of the Modes