SC iStick QC 200W User Manual page 68

66
SC iStick QC 200W - Using the Device
Rotate the Display
Hold down the "Up" and "Down" setting buttons simultaneously for two seconds while the power
is off� The display will rotate 180 degrees� This function allows you to view your settings from two
different perspectives�
Setting the Preheat Function
Press and hold down the Fire and "Up" buttons while the unit is switched off until the M1 mode
appears� After pressing the Fire button 3 times, "Power" will be shown on the display� Press the setting
button "Up" or "Down" to specify the wattage to which the vaporizer head should be preheated� Press
the Fire button again� "Time" will appear on the display� Press the setting button "Up" or "Down" to set
the desired preheating time in seconds or to switch off the preheating function�