SC iStick QC 200W User Manual page 74

72
Setting the TCR Mode (M1, M2, M3)
Press the Fire button and the "Up" button simultaneously for a few seconds while the device is switched
off to enter the TCR menu:
1� Press the Fire button to switch between TCR M1, M2, and M3�
2� Press the setting buttons "Up" or "Down" to change the values corresponding to the coil of the
vaporizer head used�
3� Hold down the Fire button or wait 10 seconds to confirm the settings�
Following are different TCR value ranges for different coils for your reference:
Material
TCR Value Range
IStick QC 200W - Selection & Operation of the Modes
Nickel Titanium
600-700 300-400
NiFe SS (303,304,316,317)
300-400 80-200
Note
1� The TCR value in the sheet is 10
multiplied of the actual TCR�
2� Our total range of TCR value is
1-1000�
5