Instructions For Vw, Tc, Tcr & Smart Operating Modes - SC iStick QC 200W User Manual

IStick QC 200W - Instructions for VW, TC, TCR & Smart Operating Modes
VW Mode (Variable Wattage)
The VW mode supports vaporizer heads in a resistance range of 0�1 ohm to 3�5 ohms�
TC Mode (Temperature Control | Variable Wattage)
In TC-Ni, TC-Ti and TC-SS modes, the device supports heads with coils made of nickel (Ni200), titanium
(Ti), and stainless steel (SS316) with a resistance of 0�05 ohm to 1�5 ohms� The temperature can range
between 100°C and 315°C or 200°F and 600°F in TC mode, depending on the vaporizer head being
used�
TCR mode (Temperature Coefficients of Resistance)
In TCR mode (M1, M2, M3), the device supports head coils made of nickel (Ni), titanium (Ti), nickel
iron (NiFe), and stainless steel (SS303/304/316/317) with a resistance range of 0�05 ohms to 1�5 ohms�
Depending on the vaporizer head used, the temperature can be between 100°C and 315°C or 200°F
and 600°F in TCR mode� This mode allows you to select different temperature coefficients of the wire or
to operate with different TCR values�
Please note that the resistance of the vaporizer head used must be set before it is first used in TC/
TCR mode.
69