Control Change Cc - Electro-Harmonix V256 Vocoder Manual

Table of Contents

Advertisement

MIDI Input Jack
The V256 has a standard 5 pin MIDI input jack. You can play the V256's internal synthesizers
using a MIDI keyboard or sequencer. Out of the INST output jack, the internal synthesizers
will be heard the same way an instrument input will be heard. If the INST output jack has
the blend set 100% dry, only the dry internal synthesizer, "played" by a MIDI controller, will
be heard. If the INST output jack has the blend set at noon, a mix of the dry MIDI controlled
internal synth and the wet vocoded effect will be heard. With the INST output jack at 100%
wet, the dry MIDI controlled internal synth will no longer be heard, only the vocoded effect
will be heard.
Additionally the V256 can receive control messages from a MIDI controller or other MIDI
device so that every function in the V256 is MIDI controllable. Below is a list of the MIDI
control parameters. The default setting for the V256 from the factory is OMNI OFF, set to
channel 16.
PATCH CHANGE
Program numbers 1 to 9 (1= VOX ROBO 1, 9 = REFLEX-TUNE) select V256 modes with
presets loaded.
Program numbers 11 to 19 (11 = VOX ROBO 1, 9 = REFLEX-TUNE) select V256 modes
without presets loaded.
CONTROL CHANGE
CC 1
CC 7
CC 14
CC 15
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 64
CC 124
CC 125
Modulation Depth: 0-127
Internal Synth Volume: 0-127
Maximum Pitch Bend in Semitones: 0-12
Fine Tuning: units of 1.5625 cents. 0=-100 cents, 64=0
cents, 127=98.44 cents
BLEND Knob:
BANDS Knob:
TREBLE Knob:
GENDER Knob:
PITCH Knob:
INST. Out Jack Blend: 0=100% INST.; 127=100% Effect.
LFO rate: 0=stopped to 127= Maximum Modulation Rate
Effect On/Bypass: On = 127; Bypass= 0
MIC BYPASS/Freeze FSW: 127 = pressed, 0 = released
PRESET FSW: 127 = pressed, 0 = released
ENCODER PRESS: 127 = pressed, 0 = released
Internal Synth Sustain: 0-127
Omni off (Only when received on default channel = 16) send "0"
Omni on (Only when received on default channel = 16) send "0"
0=CCW 127=CW
0=CCW 127=CW
0=CCW 127=CW
0=CCW 127=CW
0=CCW 127=CW
15

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V256 Vocoder and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Products for Electro-Harmonix V256 Vocoder

Table of Contents