Disassembling The Stepping Motor Unit; Disassembling The Optical Pickup Unit - Panasonic TC-15DT2 Service Manual

2. Disconnect the 2 flexible cables.
8.6. Disassembling the Stepping
Motor Unit
1. Disconnect the flexible cable.
2. Remove the 2 screws.
Note
Take care when handling the flexible cable because it can
be broken by excessive force.
8.7. Disassembling the Optical
Pickup Unit
1. Remove the hook of the FPC holder, then remove the FPC
holder itself.
2. Remove the screw.
3. Release the tab, then remove spring holder 1.
Note
Be sure not to lose the spring.
4. Remove the guide shaft.
Note
Be sure to adjust the optical pickup tilt after replacing
the optical pickup.
(Refer to section 11.12, Opitcal Pickup Tilt Adjustment.)
23
TC-15DT2