PEAK COMMUNICATIONS IBDH Series Installation And Operating Handbook page 17

The Peak SNMPv2 MIB files are available from Peak Communications Ltd website, below is a
quick overview of them.
The Peak Enterprises node is essentially split into three main areas:
Converters - In this node there is a peakxxxxxxxxxxxxxxxModule showing a table of the
Converter module(s), this is where the band of the unit can be checked/changed.
Unit – This node allows the unit status to be checked as well as the Ethernet and redundancy
settings.
PeakFaultsModule – This node contains the unit summary alarm as well as a table showing all
the faults currently on the unit.
Issue 1.34 IBDH/IBUH/TLTH/ILAH Installation and Operation Handbook Page 17