Upc - PEAK COMMUNICATIONS IBDH Series Installation And Operating Handbook

UPC

When the unit is part of a UPC system it needs to be associated with a channel number, this is
the menu option that allows this. It can be ignored for non-UPC attached units. The menu is not
shown if the unit is not UPC controllable. For operational details see the latest UPC manual.
Log
Event Log of any errors or events that have arisen.
1 View - Displays the stored logs.
2 Clear - Allows the user to clear the log.
Service
This menu has 5 submenus as shown below in figure 13.
1 Monitor Points - Allows monitoring of PSU points and internal temperature.
2 Display Timeout - Allows setting of display timeout
3 Time And Date - Allows setting of current time and date
4 CLEAR NVRam - Allows complete reset of the memory, care must be taken when selecting
this option as unit will lose all data.
5 RESET - Forces a software reset of the unit.
Issue 1.34 IBDH/IBUH/TLTH/ILAH Installation and Operation Handbook
Figure 15
Figure 16
Figure 17
Page 14