Sony NXCAMTM HXR-NX5U User Manual page 17

XtraFine EVF
The 0.45-inch-type XtraFine electronic viewfinder (EVF) has approximately 1,227,000 pixels
(852 x 3 (RGB) x 480). This device has three independent LEDs for Red, Green, and Blue colors.
The EVF has a selectable display mode (Color or Black and White mode). It also displays
virtually 100% of the recorded picture area at a color temperature of approximately 6500K,
and has an improved interface for easier viewing of the on-screen menu.
Hardware Switch for
Headphone Monitor
A high-quality headphone monitor jack allows
the user to instantly check the quality of
recorded audio. The HXR-NX5U is equipped with
a hardware switch so the user can change the
output to Channel 1 or Channel 2, or mix both
channels together. There is no need to go into
the menu to change the headphone output.
Versatile Terminal Interfaces
1. HD-SDI
The HXR-NX5U is equipped with an HD-SDI*
t e r m i n a l , m a k i n g i t e a s i e r a n d m o r e
convenient to install the camcorder into high-
end video editing systems. If the system
has an HD-SDI input, the camcorder can be
connected to the system with a BNC cable.
No conversion boxes are needed. The
camera's E to E output from the HDSDI terminal
will be a 10 bit uncompressed 4:2:2 signal.
*Timecode and audio signals are embedded in the HD-SDI signal.
*SD-SDI is also available.
2. HDMI terminals
The HDMI interface allows easy connection
to consumer electronic devices.
3. RCA-pin-type composite and
audio outputs terminals
4. Component output with AV/R-out
5. USB
6. Remote Terminal
7. TC Link
By connecting two camcorders
with a standard mini-plug
cable, using the TC Link
function, timecodes of the
two camcorders can be
synchronized.
17