Switching On And Off; Before Using For The First Time; Operating The Appliance - Miele FNS 37402i Operating And Installation Instructions

Switching on and off

Before using for the first time

Removing packaging material
 Remove all packaging material from
the inside of the appliance.
Cleaning
Please refer to the relevant
instructions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Each touch of a sensor is confirmed
with a keypad tone. The keypad tone
can be switched off if you wish (see
"Further settings").
18
Switching on
When the appliance is connected to the
electrical supply, the mains connection
symbol  will appear in the display
after a short while.
 Touch the On/Off sensor.
The appliance will start to cool. The
mains connection symbol  goes out
and the temperature appears in the
display.
The temperature display and the alarm
symbol  will flash at the same time
until the required temperature is
reached. If the current temperature
inside the appliance is above 0 °C, two
bars will flash in the display.
When the appliance door is opened, the
interior lighting comes on and the LED
lighting becomes brighter until it
reaches its maximum brightness.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.