Whilst counterholding the adjusting
bolts with a screwdriver, tighten
the nuts on the appliance door
with the ring spanner .
The cover strip must be
completely hidden in the niche, and
must not protrude.
Installing the appliance
Drill fixing holes in the furniture
door and screw in the screws .
Make sure the two metal edges are
aligned (Symbol //).
Close the appliance door and the
furniture door.
- Adjusting the depth (Z)
Loosen the screws at the top of
the appliance door and the screw
on the fixing bracket at the bottom.
By moving the furniture door, create a
gap of 2 mm between the furniture
door and the front edge of the
furniture unit.
77