ActionTec Wireless DSL Gateway GT704WG-QW04 User Manual page 47

Actiontec DSL Gateway User Manual
Priority
Select either "High" or "Normal" for the priority level of the type of data traffic
being configured.
Protocol
Select the data protocol type being configured here. Click on the down arrow to
reveal the options: , , , , .
ALL TCP UDP GRE ICMP
Set IP Precedence
To activate Precedence, click in the appropriate box. Once activated, the user can
IP
set the precedence level of the traffic being configured by clicking on the down
IP
arrow and selecting an option level from 1 (low priority) to 7 (high priority).
Source
Select the "Source" type (" " for address, " " for address) here, then
IP IP MAC MAC
enter the or address in the text box to the right. If was selected, enter a
IP MAC IP
netmask address in the appropriate text box. The user can also set a port range .
Destination
Select the "Destination" type (" " for address, " " for address) here,
IP IP MAC MAC
then enter the or address in the text box to the right. If " " was selected,
IP MAC IP
enter a "netmask" address in the appropriate text box. The user can also set a port
range.
Rule List
Once a QoS priority rule is configured, click Add. The rule will appear in the "Rule
List" text box. The user can add more rules to this list, or remove a rule by select-
ing it, then clicking Remove.
44