Table of Contents
Advertisement
Note: Before Remote Management can be activated, the admin-
istrator password must be set. To do this, go to the Setup screen
and select Change Admin Password. Follow the instructions in
the subsequent screens
To access the Gateway via Telnet, activate Remote Telnet by selecting On next to
"Remote Telnet."
Port Forwarding
Selecting Port Forwarding in the "Advanced Settings" screen generates the "Port
Forwarding" screen. Port forwarding allows certain programs to bypass the
Gateway's built-in firewall, allowing access to parts of the network (for hosting a
Web or ftp server, for example). To use port forwarding, enter the
in the "
Port Range" text boxes. (If more than 10 ports are needed, Actiontec
IP
recommends using
information.) Choose the protocol type from the "Protocol" list box, then enter the
address of the computer on the network to be used as a host. Click Add. The
IP
forwarded ports appear in the "List of Forwarded Ports" text box.
To remove forwarded ports, highlight them, then click Remove.
Chapter 4 Configuring Advanced Settings
Hosting. See "
DMZ
Hosting" on the next page for more
DMZ
39
port range
IP
Advertisement
Table of Contents
