Advertisement
Quick Links
INSTALLATION GUIDE
MODEL: CANMAX400
FIRMWARE: FORD1
Update Alert: Firmware updates are posted to the web on a
regular basis. We recommend you check for firmware and/or
install guide updates prior to installation of this product.
INDEX
Vehicle compatibility chart
Installation (overview)
Installation
Wiring Chart 20 PIN ..............
12 & 4 PIN Harness (using without D2D ONLY) ............................................................................. 04
Module Programming
........................................................................................................................ 05
Warranty........................................................................................................................................... 06
Two (2) valid keys are required to program.
........................................................................................
...................................................................................................................... 02
...........................................................................................................
PLEASE NOTE
Vehicle Integration Canbus System
TECHNICAL SUPPORT / INFORMATION
© 2009 Directed Electronics. All rights reserved.
Rev.: 20091005
Page 1 to 6
www.xpresskit.com
03
web resources:
www.xpresskit.com
www.xpressvip.com
www.directechs.com
Advertisement
Related Manuals for Xpresskit Canmax Series
Summary of Contents for Xpresskit Canmax Series
- Page 1 Page 1 to 6 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend you check for firmware and/or install guide updates prior to installation of this product. INDEX www.xpresskit.com Vehicle compatibility chart ..................Installation (overview) ........................02 Installation Wiring Chart 20 PIN ....
-
Page 2: Installation Procedures (Overview)
INSTALLATION GUIDE Vehicle Integration Canbus System MODEL: CANMAX400 FIRMWARE: FORD1 Rev.: 20091005 Page 2 to 6 Installation procedures (Overview) Please Note: Failure to proceed in the following order could result in possible vehicle damage. Wiring Connect 20 pin to module Make all connections Connect the 20 pin as per wiring... -
Page 3: Installation
INSTALLATION GUIDE Vehicle Integration Canbus System MODEL: CANMAX400 FIRMWARE: FORD1 Rev.: 20091005 Page 3 to 6 INSTALLATION (For system without D2D, you have to connect the 12 pin harness, see page 5) Wiring Chart 20 PIN installation PIN Description Ground Ignition PIN Description See below for... - Page 4 INSTALLATION GUIDE Vehicle Integration Canbus System MODEL: CANMAX400 FIRMWARE: FORD1 Rev.: 20091005 Page 4 to 6 D2D: 12 PIN HARNESS Wiring for system connected in D2D ONLY Wiring of 20 pin connector must be done with these connections too) Pink (+) Ignition 12 pin connector from CANMAX...
-
Page 5: Module Programming
INSTALLATION GUIDE Vehicle Integration Canbus System MODEL: CANMAX400 FIRMWARE: FORD1 Rev.: 20091005 Page 5 to 6 Jumper Please Note: position When a CANMAX400 is used in D2D with either Viper™, Clifford™ or Python™, the jumpers on the remote starter MUST be placed in the Horizontal position. Module Programming TWO Valid Keys Required to program Max 5 second intervals between each step. -
Page 6: Limited One-Year Consumer Warranty
INSTALLATION GUIDE Vehicle Integration Canbus System MODEL: CANMAX400 FIRMWARE: FORD1 Rev.: 20091005 Page 6 to 6 LIMITED ONE-YEAR CONSUMER WARRANTY For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer;...