Step 5: Installing Reflector - Allen-Bradley Guardmaster 445L-AMSTD2M User Manual

Step 3: Securing 500 mm cantilever to post
Step 4: Installing muting sensors and reflectors

Step 5: Installing reflector

Hold the cantilever profile between the universal fastening sets. Using a #4
hex tool tighten the hex head screws.
Mount the muting sensor to the bracket. Mount the muting sensor and the
bracket to the slot in the extrusion using the supplied hardware.
Mount the reflector to the supplied bracket. Mount the bracket to the
extrusion slot using the supplied hardware. Position the reflector and
tighten bracket hardware.
Original instructions
Floor Mounting Stand and Cantilever User Manual
5