Step 1: Supplied Parts - Allen-Bradley Guardmaster 445L-AMSTD2M User Manual

Floor Mounting Stand and Cantilever User Manual
445L-AMSTD2M Floor Mounting Stand

Step 1: Supplied parts

9
1
Step 2: Assembling floor plate to post
2
8
6
5
7
4
3
2
Original instructions
1 1 pc. Profile 60 x 60 x 2000 mm (2.4 x 2.4 x 78.7 in.)
2 Floor plate to extrusion mounting hardware
4 pcs. Zinc hexagon socket head cap screws DIN 912 M6 x 25 mm
(0.98 in.)
6 pcs. Zinc washer (flat) M6 x 12 mm (0.47 in.)
3 3 pcs. Zinc set screw DIN 913 M12 x 12 mm (0.47 in.)
4 1 pc. Aluminum, black anodized floor mounting plate
5 Micro 400 bracket hardware (bracket not included)
2 pcs. Zinc-plated T-slot nut 6 steel M4
2 pcs. Hexagon socket head cap screw DIN 912 M4 x 14 mm
(0.55 in.)
6 Brackets
445L-AF6145 Micro 400 flat bracket (not included)
7 Safe 4 bracket 445L-AF6140 hardware (bracket not included)
2 pcs. Zinc-plated T-slot nut 6 steel M6
2 pcs. Hexagon socket head cap screw DIN 912 M6 x 20 mm
(0.79 in.)
8 Brackets
445L-AF6140 Safe 2/4 bracket (not included)
9 Muting box hardware (muting box not included)
2 pcs. Zinc-plated T-slot nut 6 steel M5
2 pcs. Zinc washer (flat) M5 x 10 mm (0.39 in.)
2 pcs. Hexagon socket head cap screw DIN 912 M5 x 12 mm
(0.47 in.)
Not shown:
4 pcs. Cover profiles for hiding cables (aluminum, 300 mm
(11.8 in.))
1 pcs. Profile top cap 60 x 60 mm (2.4 x 2.4 in.)
Position the floor plate to the bottom of the two meter post with the
recessed holes opposite the post. Premount the screws with the washer in
the holes of the floor plate.
For use as a muting system, assemble
cantilevered arms prior to installing the floor
IMPORTANT
mounting plate.