Mitsubishi Electric PEFY Series Technical & Service Manual page 21

8-5.
1. Remove the service panels 2 and 3 according to
the procedures detailed in section 8-1. Service panel
(page16).
2. Remove the control box cover according to the
procedures detailed in section 8-2. Control box
(page17).
3.
white) from the control board.
4. Removing the drain pump assembly (Figure 5-1)
(1) Remove the two drain pump mounting screws.
5. Removing the drain pump and drain sensor (Figure
5-2)
(1) Remove the two drain pump cover sheet metal
mounting screws.
(2) Remove the three drain pump mounting screws.
(3)
sheet metal.
HWE12120
Explanatory figure
Drain pump assembly
Figure 5-1
Pump cover sheet metal
Drain sensor
Figure 5-2
21
Drain pump