Table of Contents
Advertisement
Changing/checking the settings in your camcorder (Continued)
b Notes
• The exposure correction value (EV), shutter
speed, iris and flash on/off will be displayed
during viewing still images.
• When you play back the memory card on other
devices, the camera data may be displayed
incorrectly. Confirm the correct camera data on
your camcorder.
Displaying the settings in your
camcorder (Status check)
You can check the settings of the following
items.
• Audio setup such as microphone volume
level (p. 71)
• Output signal setup ([VIDEO OUT], etc.)
(p. 70)
• Functions assigned to the ASSIGN
buttons (p. 39)
• Camera setup (p. 65)
• Memory card information
You can check the estimated used and free
spaces.
• Battery Info
You can check the remaining capacity of
the attached battery.
46
1
Press the STATUS CHECK button
C.
2
Turn the SEL/PUSH EXEC dial D
until a desired display shows up
on the screen.
AUDIO t OUTPUT t ASSIGN t
CAMERA t MEDIA INFO t
BATTERY INFO
Setup items are displayed according to
the settings of the camcorder when it is
turned on.
To hide the display
Press the STATUS CHECK button C.
Advertisement
Table of Contents
