Table of Contents
Advertisement
Step 7: Inserting a memory card (Continued)
Database File.] screen appears. Follow the
screen indication, and touch [YES].
To eject the memory card
Lightly push the memory card once.
b Notes
• When the access lamp is lit or flashing in red,
your camcorder is reading/writing data. Do not
shake or knock your camcorder, turn the power
off, eject the memory card, or remove the
battery pack. Otherwise, image data may be
damaged.
• If [Failed to create a new Image Database File.
It may be possible that there is not enough free
space.] appears in step 2, format the memory
card (p. 58).
• When inserting or ejecting the memory card, be
careful to prevent the memory card from
popping out and dropping.
Selecting the memory card slot to be
used for recording
Press the A or B button of the memory card
slot where the memory card you want to
record on is inserted. The lamp of the
selected slot lights up in green.
Memory card slot A button
Memory card slot B button
20
b Notes
• You can only select a slot that already has a
memory card inserted.
• While movies are being recorded on the
memory card, you cannot switch the slot even if
you press the memory card slot A/B buttons.
z Tips
• When only one slot has a memory card inserted,
the slot that has the memory card is selected
automatically.
• If the memory card is fully recorded during
recording, the camcorder continues recording
automatically on the memory card inserted in
the other slot (Relay recording, p. 22).
Advertisement
Table of Contents
