Table of Contents
Advertisement
Press the MENU button t select
HIGH
Automatically adjusts the white balance
while reducing redness or blueness.
MIDDLE
LOW
Automatically adjusts the white balance
while increasing redness or blueness.
b Notes
• This is only effective when white balance is
adjusted automatically.
• [AWB SENS] is not effective under a clear sky
or the sun.
AE SHIFT
ON/OFF
x
You can turn on or off the function. When
[ON] is selected,
appear on the screen.
x
LEVEL
You can set an offset value to adjust the
automatic exposure adjustment value from
[-7] (dark) - [0] (standard) - [+7] (bright)
with the SEL/PUSH EXEC dial. The
default setting is [0].
b Notes
• This function is not effective while you adjust
the iris, shutter speed and gain all manually.
z Tips
• You can assign an ASSIGN button to work as
[ON/OFF] (p. 39).
AE RESPONSE
You can select the speed at which the
exposure is adjusted automatically
following the changes in the brightness of
the subject. You can select the speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
66
(CAMERA SET) with the SEL/PUSH EXEC dial.
and selected value
AUTO IRIS LIMIT
You can select the highest iris value for the
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
b Notes
• This function is not effective during the manual
iris adjustment.
FLICKER REDUCE
B ON
Reduces flickering. Flickering of the
screen under a light source such as
fluorescent lamps will be reduced.
OFF
Not reduce flickering.
b Notes
• Flickering may not be reduced for certain light
sources.
.
BACK LIGHT
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
• [BACK LIGHT] is set to [OFF] when you set
[SPOTLIGHT] to [ON].
• [BACK LIGHT] is set to [OFF] if all of iris,
gain, and shutter speed are adjusted manually.
z Tips
• You can assign this function to an ASSIGN
button (p. 39).
SPOTLIGHT
When you set this function to [ON] (
you can prevent overexposure of light while
recording a subject under strong light, such
as a stage. For example, you can prevent
people's faces from being over-exposed.
The default setting is [OFF].
),
Advertisement
Table of Contents
