Step 2: Charging The Battery Pack - Sony Handycam HDR-CX7 Handbook

Step 2: Charging the battery pack

Battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 92) after
attaching it to your camcorder.
b Notes
• You cannot attach any "InfoLITHIUM" battery
pack other than the H series to your camcorder.
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
2
Connect the power cord to the AC
Adaptor and the wall outlet.
3
Slide the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
16
DC IN jack
AC Adaptor
4
5
b Notes
• When inserting the camcorder into the
Handycam Station, close the DC IN jack cover.
POWER
switch
DC plug
Power cord
To the wall outlet
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
Place the camcorder on the
Handycam Station as shown
above, and insert it into the
Handycam Station securely, all
the way to the bottom.
The /CHG (charge) lamp lights up and
charging starts. When the
(charge) lamp turns off, the battery is
charged.
/CHG
(charge) lamp
/CHG