TELES VoIP Box DSL Series Reference Manual page 92

5 Additional VoIP parameters
Table 5.1 Customized parameters: protocol-independent VoIP signaling (page 4 of 5)
Protocol-Independent VoIP Signaling Parameters
VoipOad=<num>
In the following examples, the OAD is 5175551212.
The digits/numbers defined here will be transmitted in front of the original OAD. In
the following example, 001 will appear in front of the number 5175551212.
EXAMPLE: VoipOad=001
To transmit only OADs consisting of more digits than those defined, enter a !, followed
by the number of digits, at the end of the entry. If the OAD has more digits, it will be
transmitted unchanged. If it has the same number or fewer digits, only the string in
front of the ! will be added in front of the OAD. In the following example, the digits
0015175551212 will appear::
EXAMPLE: VoipOad=001!10
If a minus (-) is entered, the original OAD will not appear. In the following example, no
number will be transmitted.
EXAMPLE: VoipOad=-
If integers are entered before the minus sign, only the digits entered in front of the
minus sign will be displayed. In the following example, 789 will appear.
EXAMPLE: VoipOad=789-
If an integer is entered after the minus sign, this number of digits will be removed
from the beginning of the OAD. In the following example, 517 will be removed from
the OAD:
EXAMPLE: VoipOad=-3
If -\ is entered followed by the first part of an OAD, that part will be removed. If the
string does not match, the OAD will be transmitted unchanged. In the following exam-
ple, only 1212 will be transmitted.
EXAMPLE: VoipOad=-\517555
To modify the original OAD, enter random<x>, whereby x represents a number of ran-
dom digits between 1 and 10 that will appear in the OAD. In the following example,
001 plus 2 random digits plus the original OAD will appear.
EXAMPLE: VoipOad=001random2
If --\ is entered followed by a part of an OAD (not necessarily the first part), the OAD
will not be transmitted at all. If the string does not match, the OAD will be transmitted
unchanged. In the following example, the OAD is not transmitted.
EXAMPLE: VoipOad=--\555
VoipOadIn=<string>
Specifies that the parameter VoipOad is for incoming calls only. If this parameter is
not set (default), VoipOad will apply for both directions.
VoipOadOut=<string>
Specifies that the parameter VoipOad is for outgoing calls only. If this parameter is not
set (default), VoipOad will apply for both directions.
VoipProgress=<int>
For H.323: 0=progress indicator is not transmitted. 1 (default)=progress indicator is
transmitted. 2=address complete message is transmitted. 3=call proceeding message
type changed in alerting message type.
For SIP: 0=183 response ignored and not sent. 1=183 response changed to a progress
message with inband-info-available at the ISDN interface (default). 2=183 response
changed to an address complete message at the ISDN interface. 3=183 response
changed to an alerting at the ISDN interface.
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 92