TELES VoIP Box DSL Series Reference Manual page 51

3 VoIPBox installation
Table 3.6 VoIP configuration in a route.cfg (continued)
;;; SIP profile
;;; ---------------------
[Voip:PeerA]
VoipDirection=IO
VoipPeerAddress= ;; ip address:port e.g. 1.2.3.4:5060
VoipIpMask=0xffffffff
VoipSignalling=1
VoipUser=
VoipPwd=
;VoipOwnAddress= ; optional
VoipRegistrar=rega
VoipMaxChan=60
VoipCompression=g711a g711u g729a g729b
#[Registrar:rega] #
#RegId= ;; ip address:port e.g. 1.2.3.4:5060
#RegOwnId=user@1.2.3.4
#RegUser=
#RegPwd=
#RegSignalling=1
;*END CONFIG*
– RegId contains the IP or hostname of the registrar
followed by a colon on the port number.
– RegOwnId typically contains your host name or tele-
phone number followed by an @ sign and a domain
name or IP address.
– Set user name and password as RegUser and
RegPwd.
For a test call do the following steps:
If not done, connect the VoIPBox DSL / VoIPBox BRI with
the PBX, IP network/DSL and power supply
Chapter 3.6 on page 35
Check the registration state on VoIP Statistics with the
GATE Manager. If the registration is not successful (not
registered, timeout) check and correct the settings and
activate the new configuration.
Send a call from a connected telefone to a public
number.
VoIPBox DSL / VoIPBox BRI – version 21.0.009
→).
Page 51
(see