Redirect; Redirect 1; Route.cfg: Redirect Parameters - TELES VoIP Box DSL Series Reference Manual

4 Configuration files
4.3.1.3

Redirect

This entry facilitates alternative routing when the first desti-
nation cannot be reached or is busy. A placeholder appears to
the right of the equal sign. The routing entry (MapAll) can be
defined for the redirect using the placeholder entered:
Table 4.16

route.cfg: Redirect Parameters

Redirect<type><num>=<redirect> <sin> <time>
Parameter
<type>
<num>
<redirect>
<sin>
<time>
VoIPBox DSL / VoIPBox BRI – version 21.0.009
Description
Enter 2 or 3 to set the following types:
call forwarding no answer
2
call forwarding when busy
3
Defines the number for which calls will
be redirected. The special symbol ?
may be used as a wildcard to represent
any character.
Defines the placeholder used in the
two-target routing entry and the num-
ber to which calls to <x> will be redi-
rected.
The service indicator variable sin re-
stricts the command to a service. With-
out a sin, the Redirect command is
valid for all services.
Possible service indicator values are:
00 All services
01 Telephony
02 Analog services
03 X.21-services
04 Telefax group 4
05 Videotext (64 kbps)
07 Data transfer 64 kbps
08 X.25-services
09 Teletex 64
10 Mixed mode
15 Videotext (new standard)
16 Video telephone
NOTE: Fax forwarding must be set for
analog and telephony services because
incoming fax calls from the analog net-
work may arrive with either telephony
or analog service indicators.
For type 2 redirect entries, a timer (in
seconds) can be defined after the ser-
vice indicator entry.
Page 78
No. Digits Optional
1
59
59
2 (X)
(Only op-
tional if
<time> is
not set. If
<time> is
set and
<sin> is
not need-
ed please
select 00
for sin.)
255 X